2013年6月17日星期一

Juniper certification JN0-532 exam questions and answers come out

Maybe on other web sites or books, you can also see the related training materials. But as long as you compare IT-Tests's product with theirs, you will find that our product has a broader coverage of the certification exam's outline. You can free download part of exam practice questions and answers about Juniper certification JN0-532 exam from IT-Tests.com website as a try to detect the quality of our products. Why IT-Tests.com can provide the comprehensive and high-quality information uniquely? Because we have a professional team of IT experts. They continue to use their IT knowledge and rich experience to study the previous years exams of Juniper JN0-532 and have developed practice questions and answers about Juniper JN0-532 exam certification exam. So IT-Tests's newest exam practice questions and answers about Juniper certification JN0-532 exam are so popular among the candidates participating in the Juniper certification JN0-532 exam.


IT-Tests.com's Juniper JN0-532 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of IT-Tests.com, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.


What are you waiting for? Opportunity knocks but once. You can get Juniper JN0-532 complete as long as you enter IT-Tests.com website. You find the best JN0-532 exam training materials, with our exam questions and answers, you will pass the exam.


Exam Code: JN0-532

Exam Name: Juniper (FWV,Specialist (JNCIS -FWV))

You just need to get IT-Tests's Juniper certification JN0-532 exam exercises and answers to do simulation test, you can pass the Juniper certification JN0-532 exam successfully. If you have a Juniper JN0-532 the authentication certificate, your professional level will be higher than many people, and you can get a good opportunity of promoting job. Add IT-Tests's products to cart right now! IT-Tests.com can provide you with 24 hours online customer service.


JN0-532 (FWV,Specialist (JNCIS -FWV)) Free Demo Download: http://www.it-tests.com/JN0-532.html


NO.1 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper demo   JN0-532   JN0-532

NO.2 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper answers real questions   JN0-532 practice test   JN0-532 test questions   JN0-532

NO.3 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper test   JN0-532   JN0-532   JN0-532

NO.4 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper dumps   JN0-532 practice test   JN0-532   JN0-532

NO.5 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper   JN0-532 certification training   JN0-532 practice test   JN0-532 braindump

NO.6 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper pdf   JN0-532   JN0-532

NO.7 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532   JN0-532 certification   JN0-532 test

NO.8 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper   JN0-532 test questions   JN0-532 dumps

NO.9 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper certification   JN0-532 exam dumps   JN0-532   JN0-532

NO.10 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper test questions   JN0-532   JN0-532   JN0-532   JN0-532 braindump

NO.11 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532 braindump   JN0-532 exam simulations   JN0-532

NO.12 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper exam   JN0-532 test   JN0-532

NO.13 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper study guide   JN0-532 exam   JN0-532

NO.14 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532   JN0-532 test answers   JN0-532 answers real questions   JN0-532 original questions

NO.15 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper exam simulations   JN0-532 test answers   JN0-532   JN0-532 study guide

NO.16 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper answers real questions   JN0-532 exam dumps   JN0-532 dumps   JN0-532 certification   JN0-532   JN0-532 demo

NO.17 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper   JN0-532 original questions   JN0-532   JN0-532   JN0-532

NO.18 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper demo   JN0-532   JN0-532 test   JN0-532 original questions

NO.19 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper   JN0-532   JN0-532 questions   JN0-532 dumps   JN0-532 exam

NO.20 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper exam   JN0-532 study guide   JN0-532   JN0-532 certification training

In order to prevent your life from regret and remorse, you should seize every opportunity which can change lives passibly. Did you do it? IT-Tests.com's Juniper JN0-532 exam training materials can help you to achieve your success. We can help you pass the Juniper JN0-532 exam smoothly. In order not to let success pass you by, do it quickly.


没有评论:

发表评论